Ŀ
 v3.10: Sun 06-05-1994 at 12:50:45 am (File: 39,467 bytes) 


    * Added: You can now select if you would to allow High-Ascii characters to be
      entered in the prompts. Before, this was disabled so that it could
      filter line noise. Someone e-mailed me from another country and told me
      his side of the story. This is now optional in the SVSETUP.EXE program.
    * Improved: You will notice a speed difference when you display or list
      the available voting booths. As your voting booths get more votes
      the program will start to slow down just a little little little
      bit. But in the long run, it can start to make a difference. I
      plan to make things MUCH MUCH more faster in v4.0 of Super Vote.
    * Fixed: A breath of fresh air! The 'Deleting a Specified Booth' command has
      been fixed and is now working properly. This is the strangest error I
      have come across which led to chain reactions causing other errors in
      the program. Finally!
    * Fixed: Another Strange problem, but this time with deleting booths. I
      would like to thank Robert Morris for finding this one. If you were
      to delete a voting booth, after using the 'Vote on all Un-Voted Voting
      Booths Option' (A new option in v3.00), it would delete the VBI file
      and would remove the VSI file, but it would not remove it from the
      VOTE.LST file. Now it DOES remove it from the VOTE.LST file, but now
      it doesn't remove the VSI file! Not to worry, it will be fixed. :)
    * Fixed: Strange problem when listing booths. When I was improving the
      display of the 'List Available Voting Booths' command, it appears
      that is caused some problems. I wanted to improve the speed a bit, but
      also caused some problems. <G> The error is fixed.
      
Ŀ
 v3.00: Sun 05-15-1994 at 8:45:38 pm (File Size: 38,753 bytes) 


    * Fixed. the editing booth section -> change topic of booth prompt. It
      wouldn't allow periods (.) to be entered. Also it will now display
      a field so that you can edit the previous topic.
    * Added. the option of viewing the results after voting on a voting
      booth. This is another popular required feature that I would have
      put in earlier. It's here! <G>
    * Added. the use of the USERNET.XXX file. The program will now write to
      the usernet file so that when a user type WHO, they will see they are
      in another area.
    * Fixed. the END (non-continuous) prompt. Since it caused some confusion
      when not needed, I had it not display if there were only one page of
      options. This would make it easier too, so that the user doesn't have
      to always press the SPACE bar. Also, it gets the user's attention, so
      that when he or she has to press the SPACE bar, it means that there
      is another page of options. (this stuff is hard to explain in a text
      document, if this doesn't make sense, you know why. <G>).
    * Added. a (MORE) display at the end of the continuous prompts to inform
      the users that there was more if they pressed enter. Some of the
      regular END (non-continuous) prompts looked similar to the continuous
      which caused the users to prevent pressing ENTER for more..instead
      just pressing space.
    * Fixed. the CTRL-END keyboard command in my field routines. If you had
      a field that was longer and would slide, the CTRL-END would not
      display correctly after it had been used.
    * Fixed. the UNVOTED voting booths option. If you would execute it on a
      screed display other than the first, it would go crazy with file
      errors. It can now be executed from all Booth Display screens.
    * Added. an option that will allow the users to vote on all UNVOTED
      voting booths. This one was requested by a number of people. <G> This
      is something I wanted to do earlier, but due to the special type of
      programming I used to make booths and options unlimited, it was little
      tricky. But it's finally here.
    * Fixed. the asterisks (*) display. If you had more than one screen full
      of voting booths, the first voting booth on the second, third, etc..
      screen would not display even if you had already voted on it.
    * Fixed. the data file searching. The program searches a little faster
      than it used to.
    * Added. a specifiable security level for Custom Options. If a booth
      has the FLAG set for adding Custom Options and the Current User has
      a security level great-than or equal-to the specified security, the
      user will be able to add their own Custom Options. If you would like
      all users to have access to this option, simply put 0 for the security
      level.
    * Added. the display on which option had the most votes when viewing the
      results of booths.
    * Added. an arrow display that will show the user which option they voted
      on while they are viewing the results of booths.
    * Added. disabled colors to the menu options of the VOTE.PPE file. So if
      a user doesn't have access to a certain command, that certain command
      will be colored in low color, informing the user that the option can
      not be used.
    * Added. sliding field support to my field routines. You can now have edit
      up to 200 chars in the color configuration of CHKVOTE.??? and some of
      the other fields have been extended as well.
    * Fixed. some of the bugs in my field routines. Sometimes when you were
      to hit the backspace key, it would append a strange HIGH-ASCII
      character to the end of the field, it would depend on the location
      of the cursor. Also, if you used the DELete key, it would sometimes
      remove 2 chars instead of just one. <G> Fixed. :)
    * Optimized. the SVSETUP.EXE program. It is now about 2k smaller then
      it was before without the additions.
    * Added. color support to the SVSTAT.EXE program. It will read the
      PCBSM.CLR color file just like SVSETUP.EXE will do.
    * Added. color support of the PCBSM.CLR file. SVSETUP.EXE will now read
      the PCBSM.CLR color file. This will match the colors in the PCBSETUP,
      PCBFILER, and PCBSM.
    * Fixed. the screen displays in the SVSETUP.EXE program. Screen displays
      are much, much, much, much, much, much more faster than before. Even
      in multi-taskers such as DESQview and Windows. 
    * Fixed. the screen displays in the bulletin generating utility. Screen
      displays are almost instant, even in multi-taskers.
    * Changed. the layout of the SVSTAT.EXE program. The local screen
      display has a better looking and more informative display.
    * Fixed. the bulletin generating utility again. It was display YES or
      NO in the 'Booth Creator:' display. Once again, it was caused by
      the mis-reading of the data files.
    * Fixed. the new bulletin Gererating Utility. It was display the YES and
      NO parameters that were actually part of the configuration.
      
Ŀ
 v2.10: Sun 05-01-1994 at 11:11:08 am (File Size: 35,125 bytes) 


    - Added. a new Bulletin Generating Utility. The SVSTAT.EXE porgram will
      allow you to create bulletins out of the booth result information.
    - Fixed. screen displays in SVSETUP.EXE. Screen displays are much faster
      in multi-taskers such as DESQview and MS-Windows.
      
Ŀ
 v2.00: Sat 04-23-1994 at 7:18:47 pm (File Size: 35,555 bytes) 


    - Added. path configurations for the data path and the location of the
      CHKTEXT file.
    - Changed. the SETUP.EXE filename to SVSETUP.EXE. You can delete the
      old SETUP.EXE file and simply use the SVSETUP.EXE included with this
      archive.
    - Added. the text configuration for CHKVOTE.PPE back into the program
      again. This emulates MKPCBTXT.EXE. Couple improvements. :-)
    - Fixed. the layout of the SETUP.EXE program. It now emulates the PCBoard
      setup programs so you are familiar with the way things look.
    - Added. text configuration for the reminder. Total for 4 lines in the
      CHKTEXT file. I would recommend deleting your old one, and then just
      using the one that was included with the archive.
    - Added. a little reminder to the CHKVOTE.PPE. It will remind the user
      that he or she is still logging on to the system, since the program
      is executed at the logon screens.
    - Added. text configuration for the prompt. There are now 3 lines in the
      CHKTEXT file.
    - Added. prompting with the CHKVOTE.PPE. If there are any booths that
      the user hasn't voted on, not only will the PPE notify him or her, it
      will also prompt the user.
    - Added. multi-language support for the CHKVOTE.PPE. I renamed the text
      file to CHKTEXT instead of CHKVOTE.TXT, this way the PPE can then
      recognize the file extension to read which language is being used.
    - Added. the variable @NUMVOTE@ for the CHKVOTE.TXT file to reduce it
      to only 2 lines.
      
Ŀ
 Super Vote v2.00 - PCBoard 15.1 [PPE] v2.00 Program 

